On board GPS tracker
Position, mileage, engine hours and fuel consumption recorded continuously, on any vehicle or machine.
ISIT Connect
Sensors for machinery and machines
Oil pressure, temperature, level, vibration, humidity: detect any drift before it causes downtime.
The benefits for your organisation
Sensors for machinery and machines
GPS trackers, sensors (fuel, temperature, shock, opening) and Bluetooth beacons (tags) fitted to your vehicles and machines: hours, consumption, position and condition feed screens available on a phone.
Talk to us about it- Temperature or pressure drift is detected before the part fails
- Your teams define the alert thresholds themselves, to suit your equipment
- The measurement history supports your warranty claims with suppliers
- Readings remain recorded even outside network coverage
Our sensors and tags
One sensor for every measurement need
The GPS tracker is the starting point; the sensors and beacons paired with it answer each need, from truck to tooling.
Fuel probe
Actual tank level, independent of the dashboard gauge: any abnormal variation is detected, even with the engine off.
Temperature sensor
Engine, hydraulic circuit or cold room: an alert before overheating or a cold-chain breach.
Humidity sensor
Humidity in containers and storage rooms: cement, timber and electronics protected.
Shock and vibration sensor
Detection of drops, rough handling and excessive transport speed, before the breakdown.
Pressure sensor
Abnormal oil or tyre pressure drops flagged before mechanical failure.
Opening sensor
Any unplanned access to a door, tipper or container is reported, day and night.
Long life beacon
Tracking of non-powered assets: trailers, generators, tooling. Up to one hundred beacons (tags) per GPS tracker, batteries lasting years.
Driver identification badge
Every trip tied to the actual driver, with no paper declaration.
Every sensor is chosen to fit your equipment and your business. We select them with you during the visit to your fleet.
Often deployed with
ISIT Connect
Fleet management and telematics
Track trucks, cars, tractors and construction machinery from one screen: position, engine hours, fuel and driving behaviour.
GPS trackers and safety zones
Locate every asset at all times, receive an alert as soon as it leaves an authorised zone, and speed up recovery in case of theft.
Video surveillance and site security
Watch several sites from one console, control access and hold dated video evidence in case of an incident.
Preventive maintenance
Servicing is triggered by hours actually run rather than by a fixed date: interventions are anticipated and equipment life is extended.
Drone based site monitoring
Record real progress, measure your stockpiles and earthwork volumes, and keep a dated archive of the whole project.
Construction machinery and heavy trucks
Measurements beyond the dashboard
Heavy equipment requires dedicated probes, which provide measurements complementary to those of the on-board computer.
Control fuel consumption and secure your fuel
A level probe (DUT-E range) and a flow meter (DFM range) measure fuel consumed and fuel present: any abnormal variation, even with the engine off, is detected and documented.
Know which regime the machine worked in
Engine time is split into idling, optimal load and overload: invoicing gains in accuracy and intensive equipment usage is identified.
Keep axle load under control
Axle load sensor (GNOM range): the actual weight per axle is known before departure, helping you comply with regulatory limits and preserve your equipment.
Read the CAN bus without touching the harness
Contactless reader (Crocodile model): CAN bus reading without cutting a single wire, manufacturer warranty preserved.
Available measurements depend on the machine and its year of manufacture. We check them machine by machine during the site visit, before any commitment.
GPS tracker capabilities
Reference hardware, a demanding integration
Our installations rely on GPS trackers from Teltonika Telematics, a European manufacturer specialised in on-board telematics; the main capabilities are presented below.
A reliable position, even without open sky
Reception from up to 41 satellites, accuracy maintained at low speed, dead-reckoning navigation in tunnels and covered car parks.
Direct reading from the on board computer
Via CAN bus or diagnostic port: mileage, actual fuel level, engine speed, temperature and engine load, read directly from the on-board computer.
Wireless sensors over Bluetooth
Temperature, humidity, level, opening: up to four probes per vehicle, battery-powered, with no cabin wiring.
Beacons for assets without an engine
One GPS tracker follows up to one hundred beacons (tags) at five hundred metres: trailers, generators, tooling, containers. Batteries lasting two to ten years.
Alerts ready to use
Eco-driving, speeding, prolonged idling, unauthorised towing, shock, geofence exit, signal jamming, remote immobilisation: you enable the ones relevant to your operations.
Fleet wide updates from a distance
GPS tracker settings and firmware updated from a console, without immobilising a single vehicle.
Teltonika Telematics and Technoton are brands independent of ISIT. Naming them describes the origin of the hardware we install and configure for you.
Equipment compatibility
Compatible with the equipment you already own
- Caterpillar
- SINOTRUK
- CASE
- Mahindra
- Komatsu
- JCB
- Toyota
- Isuzu
- and many others
The brands named here belong to their respective owners. Naming them indicates technical compatibility observed in the field and implies neither a partnership nor any endorsement on their part.
Let's talk about your fleet and your needs
Tell us about your business, your fleet and your objectives. We will offer you a demonstration and an approach suited to your organisation.