ISIT Business
QHSE 360, Integrated Management System
The web and mobile application that manages quality, safety and the environment, and prepares your company for ISO 9001, ISO 14001 and ISO 45001 certification.
Industries
Excavators, loaders, graders, compactors, trucks, cranes, concrete plants: position, hours and consumption of every unit in the fleet, shared with your site manager.
What we do for this industry
ISIT Business
The web and mobile application that manages quality, safety and the environment, and prepares your company for ISO 9001, ISO 14001 and ISO 45001 certification.
ISIT Connect
Record real progress, measure your stockpiles and earthwork volumes, and keep a dated archive of the whole project.
ISIT Connect
Track trucks, cars, tractors and construction machinery from one screen: position, engine hours, fuel and driving behaviour.
ISIT Connect
Servicing is triggered by hours actually run rather than by a fixed date: interventions are anticipated and equipment life is extended.
ISIT Connect
Watch several sites from one console, control access and hold dated video evidence in case of an incident.
ISIT Business
Every invoice keyed by the sales team automatically creates its accounting entry: re-keying is reduced and figures gain in reliability.
What we fit
Equipment that can be tracked with GPS trackers and sensors
Equipment that can be tracked with self-powered beacons
Construction machinery and heavy trucks
Heavy equipment requires dedicated probes, which provide measurements complementary to those of the on-board computer.
A level probe (DUT-E range) and a flow meter (DFM range) measure fuel consumed and fuel present: any abnormal variation, even with the engine off, is detected and documented.
Engine time is split into idling, optimal load and overload: invoicing gains in accuracy and intensive equipment usage is identified.
Axle load sensor (GNOM range): the actual weight per axle is known before departure, helping you comply with regulatory limits and preserve your equipment.
Contactless reader (Crocodile model): CAN bus reading without cutting a single wire, manufacturer warranty preserved.
Available measurements depend on the machine and its year of manufacture. We check them machine by machine during the site visit, before any commitment.
Teltonika Telematics and Technoton are brands independent of ISIT. Naming them describes the origin of the hardware we install and configure for you.
Our sensors and tags
The GPS tracker is the starting point; the sensors and beacons paired with it answer each need, from truck to tooling.
Position, mileage, engine hours and fuel consumption recorded continuously, on any vehicle or machine.
Actual tank level, independent of the dashboard gauge: any abnormal variation is detected, even with the engine off.
Engine, hydraulic circuit or cold room: an alert before overheating or a cold-chain breach.
Humidity in containers and storage rooms: cement, timber and electronics protected.
Detection of drops, rough handling and excessive transport speed, before the breakdown.
Abnormal oil or tyre pressure drops flagged before mechanical failure.
Any unplanned access to a door, tipper or container is reported, day and night.
Tracking of non-powered assets: trailers, generators, tooling. Up to one hundred beacons (tags) per GPS tracker, batteries lasting years.
Every trip tied to the actual driver, with no paper declaration.
Every sensor is chosen to fit your equipment and your business. We select them with you during the visit to your fleet.
Industries
Tell us about your business, your fleet and your objectives. We will offer you a demonstration and an approach suited to your organisation.